Effect of extraction processing parameters using a ribbon blender on the physicochemical properties of coffee
DOI:
https://doi.org/10.25186/.v19i.2184Abstract
In this work, the effect of the water-coffee ratio, time, and stirring speed, on the total soluble solids, extraction rate, titratable acidity, and extraction yield was evaluated for the percolation of coffee in a horizontal ribbon blender equipment. The coffee extract was obtained in a pilot unit at a constant temperature of 85°C and varying the water-coffee ratio from 4:1 to 10:1; the stirring speed between 30 and 95 RPM and the extraction time from 10 to 60 minutes. It was determined that the water-coffee ratio was the factor that had a significant influence on all the response variables, while time and stirring were significant for the extraction rate and titratable acidity. The optimal setup among the studied conditions was using a water temperature of 85°C, a water-coffee ratio of 4:1, and a stirring speed of 66 RPM for ten minutes. At these conditions, an extract of 5.85% TDS, 14.54% as yield, an extraction rate of 654.8 g/h, and a content of 5.62 mg of CGA/mL was obtained. Hence, this study presents an alternative process to obtain coffee extract in producing soluble coffee at a low industrial scale.
Key words: Chlorogenic acid; Extraction yield; Foods; Optimization; Soluble coffee.
References
ANGELONI, G. et al. What kind of coffee do you drink? An investigation on effects of eight different extraction methods. Food Research International, 116:1327-1335, 2019.
BATALI, M. E. et al. Titratable acidity, perceived sourness, and liking of acidity in drip brewed coffee. ACS Food Science & Technology, 1(4):559-569, 2021.
BATALI, M. E.; RISTENPART, W. D.; GUINARD, J. X. Brew temperature, at fixed brew strength and extraction, has little impact on the sensory profile of drip brew coffee. Scientific Reports, 10:16450, 2020.
BENINCÁ, C. et al. Pressure cycling extraction as an alternative to percolation for production of instant coffee. Separation and Purification Technology, 164:163-169, 2016.
CAPEK, P. et al. Coffea arabica instant coffee-chemical view and immunomodulating properties. Carbohydrate Polymers, 103:418-426, 2014.
CORDOBA, N. et al. Coffee extraction: A review of parameters and their influence on the physicochemical characteristics and flavour of coffee brews. Trends in Food Science & Technology, 96:45-60, 2020.
CORDOBA, N. et al. Chemical and sensory evaluation of cold brew coffees using different roasting profiles and brewing methods. Food Research International, 141:110141, 2021a.
CORDOBA, N. et al. Specialty and regular coffee bean quality for cold and hot brewing: Evaluation of sensory profile and physicochemical characteristics. LWT, 145:111363, 2021b.
DUEÑAS-RIVADENEIRA, A. et al. Determinación de las condiciones de extracción de compuestos fenólicos a partir de chuquiraga jussieuijf gmel usando la lixiviacion de muestras sólidas. Tecnología Química, 36(2):166-175, 2016.
FULLER, M.; RAO, N. Z. The effect of time, roasting temperature, and grind size on caffeine and CGA concentrations in cold brew coffee. Scientific Reports, 7(1):1-9, 2017.
GLOESS, A. N. et al. Comparison of nine common coffee extraction methods: instrumental and sensory analysis. European Food Research and Technology, 236(4):607-627, 2013.
GUINARD, J.-X. et al. A new coffee brewing control chart relating sensory properties and consumer liking to brew strength, extraction yield, and brew ratio. Journal of Food Science, 88(5):2168-2177, 2023.
INSTITUTO COLOMBIANO DE NORMAS TÉCNICAS - ICONTEC. NTC 2441:2011. Café torrado e moído. Método para determinação do tamanho médio de partícula por distribuição granulométrica. 2011. Bogotá D.C., Colombia. 2011.
INSTITUTO COLOMBIANO DE NORMAS TÉCNICAS - ICONTEC. Café tostado y molido. Método para la determinación del tamaño de partícula por distribución granulométrica (NTC 2441), pp. 1-9, Bogotá D.C., Colombia. 2011.
LINGLE, T. R. The coffee brewing handbook: A systematic guide to coffee preparation. Specialty Coffee Association of America. 2011
MESTDAG, F.; GLABASNIA, A.; GIULIANO, P. The brew. Extracting for excellence. In: FOLMER, B. (Ed.), The craft and Science of Coffee, Academic Press, p. 355-380, 2017.
MORONEY, K. M. et al. Coffee extraction kinetics in a well-mixed system. Journal of Mathematics in Industry, 7:3, 2016.
MUZYKIEWICZ-SZYMAŃSKA, A. et al. The effect of brewing process parameters on antioxidant activity and caffeine content in infusions of roasted and unroasted Arabica coffee beans originated from different countries. Molecules, 26(12):3681, 2021.
OCAMPO LOPEZ, O. L.; ALVAREZ-HERRERA, L. M. Tendencia de la producción y el consumo del café en Colombia. Apuntes del Cenes, 36(64):139-165, 2017.
RAO, N. Z.; FULLER, M. Acidity and antioxidant activity of cold brew coffee. Scientific Reports, 8:16-30, 2018.
SCHWARZMANN, E. T.; WASHINGTON, M. P.; RAO, N. Z. Physicochemical analysis of cold brew and hot brew peaberry coffee. Processes, 10(10):1989, 2022.
SULEWSKA, A et al. Advanced instrumental characterization of the coffee extracts produced by pilot scale instant coffee process. European Food Research and Technology, 247:1379-1387, 2021.
VEZZULLI, F. et al. Sensory profile of Italian espresso brewed arabica specialty coffee under three roasting profiles with chemical and safety insight on roasted beans. International Journal of Food Science & Technology, 56(12):6765-6776, 2021.
WANKAT, P. Separation process engineering: Includes mass transfer analysis. 5th. Pearson. 2022. 1167p.
ZHANG, L. et al. Extraction and physicochemical characteristics of high pressure-assisted cold brew coffee. Future Foods: A Dedicated Journal for Sustainability in Food Science, 5:100-113, 2022.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Coffee Science - ISSN 1984-3909The copyright of the articles published in this journal belongs to the authors, with the journal holding the first publication rights. As the articles are published in this journal under open access, they may be freely used, with proper attribution, for educational and non-commercial purposes
